Colorado Fishing Forum

Colorado Fishing Forum (https://www.coloradofisherman.com/forum/index.php)
-   Fly Tying (https://www.coloradofisherman.com/forum/forumdisplay.php?f=11)
-   -   Red Butt Chironomid Tying Video (https://www.coloradofisherman.com/forum/showthread.php?t=155210)

whompuscat658 11-12-2017 01:45 PM

Red Butt Chironomid Tying Video
 


Sent from my iPhone using Tapatalk

leg 11-12-2017 07:34 PM

Nice video, thanks for sharing.

whompuscat658 11-12-2017 08:03 PM

Quote:

Originally Posted by leg (Post 2023002)
Nice video, thanks for sharing.



Thank you.


Sent from my iPhone using Tapatalk

bugz 11-12-2017 08:31 PM

Good job on the video Whomp!

whompuscat658 11-12-2017 08:34 PM

66 Attachment(s)
Quote:

Originally Posted by bugz (Post 2023034)
Good job on the video Whomp!



Thank you, sir. If i was to do it over again, I'd make a few minor changes. But, it's good overall, I think.


Sent from my iPhone using Tapatalk

whompuscat658 11-12-2017 09:48 PM

Red Butt Chironomid Tying Video
 
Quote:

Originally Posted by bugz (Post 2023034)
Good job on the video Whomp!



Since we've talked about vises in the past, I really just did a significant upgrade and am stoked on it. I had a $60 generic Pakistani vise that worked well for about a month or so and then gave up on me so I went to the pro shop where I got it and they offered me a huge chunk off their last Renzetti Traveler which normally goes for $165. I ended up getting it for $112 out the door. Super grateful to them...Now I've got a true rotary vise that was made in the USA!


https://uploads.tapatalk-cdn.com/201...49d8afe27d.jpg

Sent from my iPhone using Tapatalk

Oyey 11-13-2017 08:34 AM

If you twist off your wire, you will not have to push it down..and won't dull your scissors

whompuscat658 11-13-2017 08:37 AM

Red Butt Chironomid Tying Video
 
Quote:

Originally Posted by Oyey (Post 2023098)
If you twist off your wire, you will not have to push it down..and won't dull your scissors



I'll try it. Regarding the thread after a whip finish, I notice that some people don't cut it and just pull on it for a clean break. Do you do that? Every time I try, it messes up and I end up just cutting instead.


Sent from my iPhone using Tapatalk

Oyey 11-13-2017 09:06 AM

Quote:

Originally Posted by whompuscat658 (Post 2023106)
I'll try it. Regarding the thread after a whip finish, I notice that some people don't cut it and just pull on it for a clean break. Do you do that? Every time I try, it messes up and I end up just cutting instead.


Sent from my iPhone using Tapatalk

Nope, I don't... I do two triple whips, no head cement unless totally necessary, then cut close with scissors. Save up for these in "Razors" and you will not be sad!

http://www.orvis.com/p/premium-orvis...BoCQ1AQAvD_BwE

whompuscat658 11-13-2017 11:12 PM

Quote:

Originally Posted by Oyey (Post 2023114)
Nope, I don't... I do two triple whips, no head cement unless totally necessary, then cut close with scissors. Save up for these in "Razors" and you will not be sad!



http://www.orvis.com/p/premium-orvis...BoCQ1AQAvD_BwE



Thx


Sent from my iPhone using Tapatalk


All times are GMT -6. The time now is 08:02 PM.

Powered by vBulletin® Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
SEO by vBSEO 3.6.0 PL3
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.