Colorado Fishing Forum

Colorado Fishing Forum (
-   The Tackle Garage (
-   -   leaf spring (

littlemac 06-27-2019 07:18 PM

leaf spring
I busted a leaf spring on my boat trailer Sunday anyone know a good place to get a replacement one. please dont say trailer source ,they've been jackin me around for almost a week

10 Gauge 06-27-2019 07:51 PM

Redneck trailer supply in Fredrick, maybe?

Bionic Man 06-27-2019 07:59 PM

How old is the trailer? Who is the manufacturer?

Iíve bought parts direct from Heritage, Ranger and Boatmate.

Sent from my iPhone using Tapatalk

ghostman 06-27-2019 08:45 PM

Are you near a Tractor Supply... might give them a call and ask... couldn't hurt.

albow 06-27-2019 10:27 PM

I'll bet Iron Bear Trailer (formerly Jim's Repair) on 58th can get you started in the right direction. :)

earplug 06-27-2019 11:23 PM

Probably easier and smarter to order two new springs. One for each side.

earplug 06-27-2019 11:35 PM

E has what you need. Measure old leaf springs and shackle length,
know what the trailer weight rating is and order new springs.

12b_elmo 06-28-2019 07:06 AM

Out of curiosity who are you working with at Trailer Source and what location? After that just as mentioned replace all the springs, sackle bolts, U-bolts and hardware at same time. This will save you more time later. Measure spring width most likely 1.75". Then eye to eye of the spring eye centers. Also measure shackle straps. The new springs will most likely be shorter by .25 to .5 as they get longer as they wear out. The number of leafs and the weight. Weight is not always total gross of trailer. Remember you want the springs to load and support the load but also flex on the potholes and bumps colorado has to offer. Redneck normally has good stock Iron Bear or Rockwell for last choice. Hope this helps.

littlemac 06-28-2019 06:59 PM

so I picked up my new leaf springs today and like everything else there the wrong size.the guy was dealing with at the wheat ridge trailer source was named Dave,and yes I did bring in the old springs dont know a quarter or half short would have been fine but its almost two inches!lol

albow 06-29-2019 12:57 PM

Cowboy Metal on Galapago does good work also. :)

All times are GMT -6. The time now is 10:22 PM.

Powered by vBulletin® Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.
SEO by vBSEO 3.6.0 PL3
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.