Colorado Fishing Forum

Colorado Fishing Forum (https://www.coloradofisherman.com/forum/index.php)
-   Colorado Fishing Lounge (https://www.coloradofisherman.com/forum/forumdisplay.php?f=3)
-   -   Marine Mechanic? (https://www.coloradofisherman.com/forum/showthread.php?t=159242)

walleyevzn 04-08-2018 08:10 PM

Marine Mechanic?
 
Anyone out there do carb work or know of someone that they recommend that could do this work on an older 85 HP outboard?

Bionic Man 04-08-2018 08:18 PM

I would try Best Marine in wheat ridge or the boat shop in commerce city. I bought oil from Best yesterday. They are 8 weeks out on service.

Might be worth YouTube and try it yourself. Carbs arenít terribly complicated.


Sent from my iPhone using Tapatalk

walleyevzn 04-08-2018 08:25 PM

Quote:

Originally Posted by Bionic Man (Post 2058698)
I would try Best Marine in wheat ridge or the boat shop in commerce city. I bought oil from Best yesterday. They are 8 weeks out on service.

Might be worth YouTube and try it yourself. Carbs arenít terribly complicated.


Sent from my iPhone using Tapatalk

Thanks for the reply...I usually take it to the boat shop but they are 3 weeks out as well...Not sure how it possible to get that far out on service

rvinson 04-08-2018 09:03 PM

Tis the season.... All marine mechanics in Colorado get backed up this time of year. Everyone de-winterizing and getting ready for summer.

longdraw 04-09-2018 09:24 AM

I just replaced all of my bilge and livewell pumps. It was a job that I would never had done myself if Great Lakes wasn't booked out 5 weeks. Felt good when I finally got that thing put back together though! Just do it yourself...

slayerfish 04-09-2018 12:18 PM

Can it be an ARMY or an AIR FORCE mechanic?

walleyevzn 04-09-2018 10:09 PM

Thanks for the help guys..helpful as usual

albow 04-11-2018 02:46 AM

Quote:

Originally Posted by walleyevzn (Post 2058962)
Thanks for the help guys..helpful as usual

The helpful advice you got was to check out youtube and consider doing it yourself. I was in your same situation with my first boat and that's how I learned to rebuild my carb. Since then I've done a few more. It's about as complicated as fixing a toilet. So if you've never done that, couldn't see yourself doing that then be a victim and wait until the "marine" mechanic can work you in.

Tell us more about where you are at. As in what part of town -- you may find someone on here who lives nearby who might be willing to give you a hand. Did you try Seafoam yet? Just using that according to the directions on the can will often save you a lot of trouble and get you out on the water.

Tell us more about your motor. Chances one of us will have worked on that same motor in the past and can tell you about it. Good and bad to watch out for, place to get parts, etc. If the Seafoam doesn't work next step is to take the carb off and put it on a clean work bench. You can use clean cloths from a torn up tee shirt, carb cleaner spray and a toothbrush, maybe some q-tips. A small air compressor to blow out clogged passageways is helpful. You will have ordered the correct rebuild kit from one of various online sources and so it's just a matter of carefully inspecting what you have in front of you and replacing some parts and seals where needed. Use a small dish to keep small parts from being lost. Take pics as you go. Don't work high unless you like that sort of challenge. :D You bought the manual for your motor online so that's another helpful source of reliable info to help you watch out for shortcuts and "gotchas." I've been using YouTube more than the manual lately cause it's right there in front of you with a couple of clicks.
It's a great feeling to be able to fix it yourself. You get it done quicker and you know that you did it right and saved a ton of money too. Plus a better understanding of how the thing works may come in handy sometime if you ever get running issues out on the water. 8)


All times are GMT -6. The time now is 04:26 PM.

Powered by vBulletin® Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
SEO by vBSEO 3.6.0 PL3
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.