found a rod holder in my sister new house work great have not had a fish pull my rod out yet and easy to make
2 steel strapes one of them 4 feet and the other one 2 feet 1/2 inch strap 1/8 thick
3 poprivets
and 4 to 6 inches of 1 1/2 inch pvc pipe
i drill 2 holes in the top of the longer strap about 2 inches apart and put a bend about 4 inches back at about a 45
and them depending on how high i want them bend the same strap a foot from the frist bend at a 90 then half way to the end i drill a hole now put the other strap so it the same size as the last bend and drill a hole in the center and put the poprivet in so it make a cross and them pop the pvc to the frist bend u started with to put the rod in
they fold up nice and r easy to pack i get a pic of mine and post
2 steel strapes one of them 4 feet and the other one 2 feet 1/2 inch strap 1/8 thick
3 poprivets
and 4 to 6 inches of 1 1/2 inch pvc pipe
i drill 2 holes in the top of the longer strap about 2 inches apart and put a bend about 4 inches back at about a 45
and them depending on how high i want them bend the same strap a foot from the frist bend at a 90 then half way to the end i drill a hole now put the other strap so it the same size as the last bend and drill a hole in the center and put the poprivet in so it make a cross and them pop the pvc to the frist bend u started with to put the rod in
they fold up nice and r easy to pack i get a pic of mine and post