Colorado Fisherman Forum banner

1 - 9 of 9 Posts

·
Registered
Joined
·
2,547 Posts
Discussion Starter #1
i was just curious if anyone knows were i can get a replacement blade for a strikemaster mag 2000 auger , i have an 8 iinch blade, i called bass pro , gander and they dident have it , also does anyone know anybody who sharpens auger blades

thanks
 

·
Registered
Joined
·
33 Posts
Call over to Sportsmens in Thornton. I think I seen them there. If anyone knows where to get the 10 1/4 let me know. Can't find that one anywhere in the area.
 

·
Registered
Joined
·
509 Posts
If you can wait a while, you can save a lot of money by doing a blade exchange thru the mfgr.
I have the same auger and just sharpened my blade. It was slow going as the steel is very hard. I used a 3 sided sharpening stone, it turned out real well.
http://www.strikemaster.com/store/bladeexchange.html
 

·
Registered
Joined
·
24,568 Posts
KK

Try calling High Country Bass Pro, Valley Country Tackle, or Bennetts...sometimes the out of the way places will have inventory that they never sold because people dont think of going there...also they may know of someone who sharpens auger blades...another idea is to email Terry Wicktrom on the Fan950...he might know of someplace that sharpens with all of his contacts...just a few ideas...
 
M

·
Guest
Joined
·
0 Posts
I don't know where you guys are located but there is a blade sharpening place on South Broadway - west side of the road around the area where Milty was. It's across the street from a trailer place. They laser sharpen all kinds of blades - from lawnmower blades to chop saw blades to chain saw chains. Next time I drive by I'll try to get the name of the place.

I'm not sure if they do it, but there is a machine shop on Havana South of Alameda that may be able to sharpen things as well - they do wonders on crank and camshafts and I'm sure they have the tools to sharpen blades. East side of the road south of Havana and South of the car lots. It's where the dealerships get their machining done.

Sometimes I wish I kept better track of the names of the places I do business with :-[
 

·
Registered
Joined
·
1,560 Posts
We've got them at Gander in Aurora, along with blades for the Mora and Lazer hand augers, Lazer Mag 8 and 10 inch power augers, and Mag 2000 10 inch power auger. ;)
 

·
Registered
Joined
·
3,666 Posts
Mr. Ed said:
I don't know where you guys are located but there is a blade sharpening place on South Broadway - west side of the road around the area where Milty was.  It's across the street from a trailer place.  They laser sharpen all kinds of blades - from lawnmower blades to chop saw blades to chain saw chains.  Next time I drive by I'll try to get the name of the place.

I'm not sure if they do it, but there is a machine shop on Havana South of Alameda that may be able to sharpen things as well - they do wonders on crank and camshafts and I'm sure they have the tools to sharpen blades.  East side of the road south of Havana and South of the car lots.  It's where the dealerships get their machining done.

Sometimes I wish I kept better track of the names of the places I do business with  :-[
i work for havana auto parts and i wouldn't trust our machine shop to sharpen auger blades, they do real good with a lot of things as ed mentioned, but they don't know a thing about blade angles. i've been there 10 years so i've seen the processes. if it is a chipper blade(serrated) you might be able to touch it up with a file,(that's what i do with mine) if it's a knife edge blade, good luck, i,ve seen many blades ruined by people tring to sharpen them when they don't really know what they are doing. i'm thinking i might just take my hand auger to the mile, i've heard bad things about the dirt and gravel clarity of the ice there..
 
1 - 9 of 9 Posts
Top