Colorado Fisherman Forum banner
1 - 1 of 1 Posts

· Registered
93 Posts
We use the Clam 5600 and I can help with a question or two.

1.) While standing in the setup shelter, mark where you want your holes. Move the shelter out of the way and drill the holes. Clean the ice and snow away from the holes and move the shelter back. You can temporarily drop the canopy on the shanty if the winds are excessive (takes like 30 seconds).

2.) We haven't anchored ours down yet.

3.) This shanty pulls pretty easily with one person on ice and snow without the the metal runners. Metal runners does seem like a pretty good idea to prolong its life.

I hope this helps.
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.