Colorado Fisherman Forum banner
1 - 1 of 1 Posts

· Registered
509 Posts
On my Viking shelter I used 5 inch lag bolts. I drilled a hole through the bottom of my shelter on the inside. Then I took my lag bolts, put them on the grinder and made a sharp point. I hammer the lags into the ice, then at the end of the day, I use a speed ratchet to unscrew them from the ice. This method worked real well and kept me firmly anchored during some very high winds.
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.