Colorado Fisherman Forum banner

1 - 20 of 83 Posts

·
Registered
Joined
·
16,613 Posts
Discussion Starter #4
Sure is. Is it as amazing at cutting through ice as it is gorgeous?
Everybody that tries it falls in love with it. It's a 6" just cuts like a hot knife thru butter. Cut 55 holes thru 7" of ice yesterday used 1/2 of a 5.0 AH battery.

Smooth. Light. Fast. Gorgeous!
 

·
Registered
Joined
·
16,613 Posts
Discussion Starter #5
AND I'm using the Milwaukee power source to power my LX-5. A 4 AH batt used all day still had 75% charge left.

Light!

Gorgeous!
 

·
Registered
Joined
·
3,141 Posts

·
Registered
Joined
·
6,684 Posts
Thats a nice setup Slayer!!! Ill get there..... Some day!! Wish my 19.2v Craftsman drill would handle an Auger.!! At least this route(VS an actual electric Auger) you have a bada$$ drill you can use all year round!!
 

·
Registered
Joined
·
3,141 Posts
Everybody that tries it falls in love with it. It's a 6" just cuts like a hot knife thru butter. Cut 55 holes thru 7" of ice yesterday used 1/2 of a 5.0 AH battery.

Smooth. Light. Fast. Gorgeous!
Just need a wire with a 12 volt barrel plug and a couple male spade connectors on the other end.

https://www.homedepot.com/p/Milwaukee-M18-18-Volt-Lithium-Ion-Cordless-Power-Source-Tool-Only-49-24-2371/203461325
Um. Where's the report??? Meat pix? GPS?

I teach 8th grade English -- I'm going to need a diagram. :)
 

·
Registered
Joined
·
16,613 Posts
Discussion Starter #12
The "power source" clicks onto the milwaukee battery. So ya gotta have a battery already. My LX-5 weighs 2 -3 lbs max.
 

·
Registered
Joined
·
3,141 Posts
The "power source" clicks onto the milwaukee battery. So ya gotta have a battery already. My LX-5 weighs 2 -3 lbs max.
I have two batteries for my FUEL. Pretty stoked at looking at some hacks! Home Depot, I'll be seeing you afterschool!
 

·
Registered
Joined
·
16,613 Posts
Discussion Starter #16
Maybe Ill drag out the old aqua-view since it wont weigh so freekin much-
 

·
Registered
Joined
·
16,613 Posts
Discussion Starter #18
Where do I get in on this so I can get my own ice f*cker? So sick of being the hand auger *****.
All you need is an M-18 Fuel Drill and an auger. Clam plate is optional.
 

·
Registered
Joined
·
1,635 Posts
Fantastic! Planning on trying out my new set-up this weekend! Is it pretty simple attaching everything together?? Even got new blades for the Mora :thumb:
 
1 - 20 of 83 Posts
Top